DuraClear High Gloss Varnish

Excellent product for wood crafts.

Cracks while drying and flakes off. Waste of money and a real canvas wrecker

Use this to coat all my indoor wood crafts. works great with no odor and dries very quickly so I can get multiple coats without having to wait

Coated some vintage (used) lucite beads. They were not shiny and had surface scratches. I coated them in Dura Clear High Gloss. They coated evenly, dried crystal clear, it brought them back to look "like" new & the coating is not sticky. Love it!

Got this as a topcoat for acrylic pour paintings (paint and pouring medium are also DecoArt). I followed directions, and tried it several different ways on several different types of paintings. Looked good when dry to the touch but cracked when dry.

I have tried many polyurethane finishes to coat my handmade wood ornaments and this is by far the best. It doesnt crack and it is so clear and flawless. I see some comments about it cracking when drying. That only happens if you get the coat way too thick

Results are not good. Used it over acrylics and the first coat was so so. It dried 2 days. I went over it lightly with 0000 steel wool and added a coat. After that coat + all others, the piece was covered with major hairline cracks. Pretty much ruined.

Works great for rock painting. Gives a nice glossy coat

Works but I airspray it on my models. Half Duraclear and half water. 2 coats.

If you use over acrylics make sure you mode podge it first then use the varnish…good results then.